Research Publications 2004

John A. Barnard

Butera, A., Weston, J.L., and Barnard, J.A., “Ferromagnetic resonance of epitaxial Fe81Ga19 (110) thin films”, J. Magn. Magn. Mater. 284, 17-25 (2004).

Gomez, J., Butera, A., and Barnard, J.A., “Surface anisotropy and resonance modes in Co-SiO2 heterogeneous films”, Phys. Rev. B 70, 054428 (2004). 9 pages

Li, D.S., Garmestani, H., Yan, S., Elkawni, M., Bacaltchuk, M.B., Schneider-Muntau, H.J., Liu, J.P., Saha, S., and Barnard, J.A., “Effects of high magnetic field annealing on texture and magnetic properties of FePd”, J. Magn. Magn. Mater. 281, 272-275 (2004).

Li, X., Curry, M., Wei, G., Zhang, J., Barnard, J.A., Street, S.C., and Weaver, M.L., “Nanotribological studies of dendrimer-mediated metallic thin films”, Surface and Coatings Technology 177-178, 504-511 (2004).

Sung Kwon Cho

T. K. Hsiai, S. K. Cho, P. K. Wong, M. H. Ing, A. Salazar, S. Hama, M. Navab, L. L. Demer, C.-M. Ho, 2004, “Micro Sensors: Linking Real-Time Oscillatory Shear Stress with Vascular Inflammatory Responses,” Annals of Biomedical Engineering, Vol. 32, pp. 189-201.

Minking K. Chyu

Li, P.-W., Schaefer, L., and Chyu, M. K., 2004, “A Numerical Model Coupling the Heat and Gas Species’ Multiple Transport Processes in a Tubular SOFC,” ASME Journal of Heat Transfer, vol. 126, pp. 219-229.

N.Q. Wu, K. Ogawa, M.K. Chyu and S.X. Mao, “Failure Detection of Thermal Barrier Coatings using Electrochemical Impedance Spectroscopy,” Thin Solid Films, Vol. 457, 2004, pp. 301-306.

William W. Clark

Li, Q., M. R. Lovell, J. Mei, and W. W. Clark, “A Study of Displacement Distribution in a Piezoelectric Heterogeneous Bimorph,” ASME Journal of Design, Vol. 126, July 2004, pp. 757-764.

Rory A. Cooper

Algood SD, Cooper RA, Boninger ML, Fitzgerald SG, Cooper R, Impact of a Pushrim Activated Power Assist Wheelchair on the Metabolic Demands, Stroke Frequency, and Range of Motion among Individuals with Tetraplegia, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 11, pp. 1865-1871, 2004.

Boninger ML, Impink B, Cooper RA, Koontz AM, Relationship Between Median and Ulnar Nerve Function and Wrist Kinematics During Wheelchair Propulsion, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 7, pp. 1141-1145, 2004.

Chavez E, Boninger ML, Cooper R, SG Fitzgerald, D Gray, Cooper RA, Application of a Participation System to Assess the Influence of Assistive Technology on the Lives of People with Spinal Cord Injury, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 11, pp. 1854-1858, 2004.

Crane BA, Holm MB, Hobson D, Cooper RA, Reed MP, Stadelmeier S, Consumer Involvement in the Development of a Wheelchair Seating Discomfort Assessment Tool (WcS-DAT), International Journal of Rehabilitation Research, Vol. 27, No. 1, 2004.

Cooper RA, Wolf EJ, Fitzgerald SG, Kelleher A, Ammer WA, Boninger ML, Cooper R, Evaluation of Selected Sidewalk Pavement Surfaces, Journal of Spinal Cord Medicine, Vol. 27, No. 5, pp. 468-475, 2004.

Cooper RA, Bioengineering and Spinal Cord Injury: A Perspective on the State-of-the-Science, Journal of Spinal Cord Medicine, Vol. 27, No. 4, pp. 351-364, 2004.

Cooper RA, Boninger ML, Cooper R, Fitzgerald SG, Dobson A, Preliminary Assessment of a Prototype Advanced Mobility Device in the Work Environment of Veterans of Spinal Cord Injury, Neurorehabilitation, Vol. 19, No. 2, pp. 161-170, 2004.

Ding D, Cooper RA, Guo S, Corfman TA, Analysis of Backwards Driving in an Electric-Powered Wheelchair, IEEE Transactions on Control Systems Technology, Vol. 12, No. 6, pp. 934-944, 2004.

Fass MV, Cooper RA, Fitzgerald SG, Schmeler M, Boninger ML, Algood SD, Ammer WA, Rentschler AJ, Duncan J, Durability, Value, and Reliability of Selected Electric Powered Wheelchairs, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 5, pp. 805-814, 2004.

Fay BT, Boninger ML, Fitzgerald SG, Souza AL, Cooper RA, Koontz AM, Manual Wheelchair Pushrim Dynamics in Persons with Multiple Sclerosis, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 6, pp. 935-942, 2004.

Fitzgerald SG, Cooper RA, Thorman TA, Cooper R, Guo SF, Boninger ML, GAMECycle: An Effective Mode of Exercise, Journal of Spinal Cord Medicine, Vol. 27, No. 5, pp. 453-549, 2004.

Hunt PC, Boninger ML, Cooper RA, Zafonte RD, Fitzgerald SG, Factors Associated with Wheelchair Type and Quality Among Individuals with Traumatic Spinal Cord Injury, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 11, pp. 1859-1864, 2004.

Koontz AM, Cooper RA, Boninger ML, Souza AL, Fay BT, Scapular Range of Motion in a Virtual Wheelchair Push, International Journal of Industrial Ergonomics, Vol. 33, No. 3, pp. 237-248, 2004.

Ohnabe H., Cooper RA, Trends in Wheelchairs, The Journal of The Japan Society for Welfare Engineering, Vol.6, No.1, pp. 7-13, May, 2004.

Rentschler AJ, Cooper RA, Fitzgerald SG, Boninger ML, Guo S, Ammer WA, Vitek M, Algood SD, Evaluation of Selected Electric Powered Wheelchairs Using the ANSI/RESNA Standards, Archives of Physical Medicine and Rehabilitation, Vol. 85, No. 4, pp. 611-619, 2004.

Wolf EJ, Cooper RA, DiGiovine CP, Boninger ML, Guo S, Using the Absorbed Power Method to Evaluate Effectiveness of Selected Seat Cushions During Manual Wheelchair Propulsion, Medical Engineering and Physics, Vol. 26, No. 9, pp. 799-806, 2004.

Anthony J. DeArdo

Garcia, C.I., Parish, C., Ahn, Y-S, Han, S-H, Hua, M., and DeArdo, A.J. “Challenges in Producing Coated Advanced High Strength Multiphase Steels on Continuous Galvanizing Lines,” International Conference on Thermomechanical Simulation & Processing of Steels (SIMPRO ’04), September 21-23, Ranchi, India (2004).

Garcia, C. I., Torkarz, C., Graham, C., and DeArdo, A. J., “The Physical Metallurgy of HSLA Strip Steel Production Using the CSP Process,” Proc. 2nd International Conference on Thermomechanical Processing of Steels, TMP’2004, June 15-17, Liege, Belgium, Ed. Centre de Recherches Metallurgiques, (Verlag Stahleisen GmbH, Dosseldolf, Germany), pp.173-179 (2004).

Garcia, C. I., Parish, C., Ahn, Y-S, Hua, M., and DeArdo, A. J., “Thermomechanical Processing Challenges in the Cold Mill,” Proc. 2nd International Conference on Thermomechanical Processing of Steels, TMP’2004, June 15-17, Liege, Belgium, Ed. Centre de Recherches Metallurgiques, (Verlag Stahleisen GmbH, Dosseldolf, Germany), pp.442-447 (2004).

DeArdo, A.J., “Microalloyed, multi-phase Steels: the value-added steel product for the Chinese steel industry in the 21st century,” Invited Keynote Presentation at the First Annual Academic Conference, Baosteel Company, Shanghai, China, May 27-29 (2004).

DeArdo, A.J., Hua, M., Garcia C. I., and Thillou, V., “Precipitation Hardening of Ferrite in Commercially Processed Niobium-Bearing HSLA Steels,” Invited Keynote Paper, 2004 MATERIALS SCIENCE & TECHNOLOGY PROCEEDING, TMS and AIST (2004).

Garcia, C. I., Parish, C., Ahn, Y-S, Hua, M., and DeArdo, A. J., “Thermomechanical Processing Challenges in the Cold Mill,” Proc. Advanced High Strength Steels for Automotive Applications, June 6-9, 2004, Winterpark, Colorado, (AIST), pp.285-291, (2004).

Garcia, C. I., Parish, C., Ahn, Y-S, Hua, M., and DeArdo, A. J., “Thermomechanical Processing Challenges in the Cold Mill,” ‘Materials Science & Technology 2004 Congress’ (MS&T '04), September 25-29, 2004. TMS and AIST, New Orleans, LA, USA, AIST Publication 254-255, (2004).

Wu, J., Wray, P.J., Garcia, C.I., Hua, M., and DeArdo, A.J., “Image Quality Analysis: A New Method of Characterizing Microstructures,” 2004 MATERIALS SCIENCE & TECHNOLOGY PROCEEDING, TMS and AIST (2004).

Pradeep P. Fulay

Askeland, D.R. and Phule, P.P., Essentials of Materials Science and Engineering, Thomson, 2004.

Giovanni P. Galdi

Berselli, L.; Galdi, G.P., On the Space-Time Regularity of C (0,T;Ln)-Very Weak Solution to the Navier-Stokes Equations. Nonlinearity, 58, (2004) 703-717

Galdi, G.P., Simader, C., Sohr, H., A Class of Solutions to Stationary Stokes and Navier-Stokes Equations with Boundary Data in W1-/q,q(∂? ), Math. Ann. 331, (2004) 41–74, on line

Galdi, G.P.; Sohr, H., Existence and Uniqueness of Time-Periodic Physically Reasonable Navier-Stokes Flow Past a Body. Arch. Ration. Mech. Anal. 172 (2004) 363-406

Galdi, G.P.; Silvestre, A.L., Strong Solutions to the Navier-Stokes Equations Around a Rotating Obstacle, Arch. Ration. Mech. Anal., 176 (2004) 331-350, on line

Galdi, G.P., Stationary Navier-Stokes Problem in a two-dimensional exterior domain, Handbook of Differential Equations, Vol. 1: Stationary Differential Equations, North-Holland Elsevier Science, (2004), 71-156 Invited Paper

Wang, J.; Bai, R.; Lewandowski, C.; Galdi, G.P.; Joseph, D.D., Sedimentation of Cylindrical Particles in a Viscoelastic Liquid: Shape-Tilting, China Particuology, 2, No.1, (2004) 13-18

C. Isaac Garcia

Peyman Givi

P. Givi, “Book Review: Computational Models for Turbulent Reacting Flows, by R.O. Fox, Cambridge University Press, Cambridge, UK (2003),” in AIAA Journal, 42(6), p. 1276, 2004.

Mingjian Hua

John P. Leonard

Leonard, J.P., Renk, T.J., Thompson, M.O., and Aziz, M.J., “Solute diffusion in liquid nickel measured by pulsed ion beam melting”, Metal. Mater. Trans. A, 35, pp. 2803-2808 (2004).

Kline, J.E. and Leonard, J.P., "Suppression of dewetting in pulsed laser melting of thin metallic films on SiO2", Mat. Res. Soc. Symp. Proc., Vol. 854E, U11.6.1 Dec. (2004).

Joseph H. Magill

Magill, J.H. and Kojima, M., “Crystallization of Polyphosphazenes”, In: Phosphazenes: A Worldwide Insight; Eds: M. Gleria and R. De Jaeger, pp. 305-342, Nova Science Publishers (2004).

Scott X. Mao

Zheng Chen, Zhiwei Shan, M. S. Cao, Lu Lei, Scott X. Mao “Zinc Oxide Nanotetrapods”, Nanotechnology, 15(2004), p 365.

Zheng Chen, Zhi-wei Shan, N. Q. Wu, V. K. Sikka, Mingjian Hua and Scott X. Mao, “Fine Carbides Strengthened 3Cr-3WVTa Bainite Steels”,Metallurgical and Materials Transactions A, Vol. 35A,( 2004) 1281

Zheng Chen, Zhiwei Shan, Shouxin Li, C. B. Liang and Scott X. Mao, A novel and simple growth route towards ultra-fine ZnO nanowires , J. Crystal Growth, Vol.265, pp482-486 (2004).

Z. Shan, E.A. Stach, J.Wiezorek, J.A. Knapp, D.M. Follstaedt, and S.X. Mao*, “Grain Boundary Mediated Plasticity in Nanocrystalline Nickel”, Science Vol.305, p.654-657 (2004).

N. Wu, C. Xia, M. Li and S.X. Mao, “Interfacial structure and micro- and naomechanical behavior of laser welded 6061 aluminum alloy blank”, J. Eng. Materials & Technology Vol. 126,pp8-13 (2004).

N.Q. Wu, K. Ogawa, M.K. Chyu and S.X. Mao, “Failure Detection of Thermal Barrier Coatings using Electrochemical Impedance Spectroscopy,” Thin Solid Films, Vol. 457, 2004, pp. 301-306.

M. Zhao, Z. L. Wang, S. X. Mao, "Piezoelectric characterizationof individual zinc oxide nanobelt probed bypiezoelectric force microscope", Nano Letters,Vol.4, pp 587-590 (2004).

Gerald H. Meier

Onal, K., Maris-Sida, M. C., Meier, G. H., and Pettit, F. S., “The Effects of Water Vapor on the Oxidation of Nickel-Base Superalloys and Coatings at Temperatures from 700 to 1100°C”, in Superalloys 2004, K. A. Green, T. M. Pollock, H. Harada, T. E. Howson, R. C. Reed, J. J. Schirra, and S. Walston, eds., TMS, p. 607, (2004).

Mark C. Miller

M.C. Miller, K. Galik, S. Conti and P. Smolinski, Stresses in Polyethylene Liners in a Semiconstrained Ankle Prosthesis, Journal of Biomechanical Engineering, Vol. 126, pp. 25-33, October, 2004.

Ian Nettleship

Schmidt, S.A. and Nettleship, I., “The Effect of Coarse Particles on the Microstructural Evolution of Porous Alumina Sintered at 1375OC,” J. Euro. Ceram. Soc., 24 2741-2747 (2004).

McAfee, R.J. and Nettleship, I., “A Mesoscale Description of Microstructural Evolution for Slip Cast Alumina Sintered at 1350ºC,” Ceram Trans. 157, 105-115 (2004).

Frederick S. Pettit

Donald J. Plazek

Roland, C.M., Nagai, K.L., and Plazek, D.J., “Modes of molecular motion in low molecular weight polystyrene”, Macromol. 37, 7051-7055 (2004).
Robertson, C.G., Warren, S., Plazek, D. J., and Roland, C. M., “Reentanglement Kinetics in Sheared Polybutadiene Solutions”, Macromol. 37, 10018-10022 (2004).

George A. Richards

Richards, G.A., Berry, A., Freed, A., Analysis of a heat recirculating cooler for fuel gas sulfur removal in solid oxide fuel cells, J. Power Sources, Vol. 134 (2004), pp. 49-56.

Laura Schaefer

Lu, Y., and Schaefer, L., 2004, “A SOFC System Fed with Hydrogen Sulfide and Natural Gas,” Journal of Power Sources, vol. 135, pp. 184-191.

Schaefer, L. A., and Schaefer, A. J., 2004, “Locating Hybrid Fuel Cell-Turbine Power Generation Under Uncertainty,” Annals of Operations Research, vol. 132, pp. 301-322.

Patrick Smolinski

M.C. Miller, K. Galik, S. Conti and P. Smolinski, Stresses in Polyethylene Liners in a Semiconstrained Ankle Prosthesis, Journal of Biomechanical Engineering, Vol. 126, pp. 25-33, October, 2004.

Qing-Ming Wang, Zhaochun Yang, Fang Li, and Patrick Smolinski, “Analysis of Thin Film Piezoelectric Microaccelerometer Using Analytical and Finite Element Modeling,” Sensors and Actuators A: Physical, 113, pp.1-11 (2004)

Z.Yang, Q.-M. Wang and P. Smolinski, “Analysis of Thin Film Piezoelectric Microaccelerometer Using Analytical and Finite Element Modeling,” Sensors and Actuators A, Vol. 113, pp. 1-11, 2004

Jeffrey S. Vipperman

Li, Deyu and J. S. Vipperman, “On the design of long T-shaped acoustic resonators,” Journal of the Acoustical Society of America, 116(5), Nov. 2004, pp. 2785-92.

James H-C Wang

Campbell, B.H., C. Agarwal, Wang, JH-C. TGF-?1, TGF-?3, and PGE2 regulate contraction of human patellar tendon fibroblasts. Biomech Model Mechanobiol. 2:239-45, 2004.

Cetin, S., Ford, H.R., Sysko, L.R. Agarwal, C., Wang, JH-C., Neal, M.D., Baty, C., Apodaca, G., and Hackam, D.J. Endotoxin inhibits intestinal epithelial restitution through activation of rho-gtpase and increased focal adhesions. J Biol Chem. 279:24592-600, 2004.

Cilli, F., Khan, M., Fu, F., Wang, JH-C. Prostaglandin-E2 affects the proliferation of and collagen synthesis by human patellar tendon fibroblasts. Clin J Sports Medicine, 14(4):232-6, 2004.

Li, Z., Yang, G., Khan, M., Stone, D., Woo, S.L-Y., and Wang, J.H-C.: Inflammatory Response of Human Tendon Fibroblasts to Cyclic Mechanical Stretching. Am. J. of Sports Medicine, 32:435-440, 2004.

Musahl, V., Abramowitch, S., Gilbert, T., Tsuda, E., Wang, J.H-C., and Woo, S.L-Y.: The Use of Porcine Small Intestinal Submucosa to Enhance the Healing of the Medial Collateral Ligament – A Functional Tissue Engineering Study in Rabbits. J. of Orthopaedic Research, 22:214-220, 2004.

Peperzak, K.A., Gilbert, T.W., Wang, JH-C. A multi-station dynamic culture force monitor system to study cell mechanobiology, Med Eng & Phys,26(4):355-358, 2004.

Wang, J.; Bai, R.; Lewandowski, C.; Galdi, G.P.; Joseph, D.D., Sedimentation of Cylindrical Particles in a Viscoelastic Liquid: Shape-Tilting, China Particuology, 2, No.1, (2004) 13-18

Wang, JH-C., Yang, G., Li, ZZ, , Shen, W. Fibroblast responses to mechcanical stretching depends on cell orientation, J Biomech, 37:573-576, 2004.

Wang, JH-C., Li, ZZ., Yang,GG, and Khan M. Repetitively stretched tendon fibroblasts produce inflammatory mediators. Clin Orthop 422:243-250, 2004.

Yang, G.G., Crawford, R.C., Wang, JH-C. Proliferation and collagen production of human patellar tendon fibroblasts in response to cyclic uniaxial stretching in serum-free conditions. J Biomech,37:1543-1550, 2004.

Qing-Ming Wang

Jiping Cheng, Ruyan Guo, and Qing-Ming Wang, “Zinc Oxide Single Crystal Microtubes”, Appl. Phys. Lett. 85, 5140 (2004)

Xiao-Hong Du, Qing-Ming Wang, and Kenji Uchino, “An Accurate Method for the Determination of Complex Coefficients of Single Crystal Piezoelectric Resonators, II: Design of Measurement and Experiments”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 51(2), pp. 238-248 (2004)

Xiao-Hong Du, Qing-Ming Wang, and Kenji Uchino, “An Accurate Method for the Determination of Complex Coefficients of Single Crystal Piezoelectric Resonators I: Theory” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 51(2), pp. 227-237 (2004)

Z.Yang, Q.-M. Wang and P. Smolinski, “Analysis of Thin Film Piezoelectric Microaccelerometer Using Analytical and Finite Element Modeling,” Sensors and Actuators A, Vol. 113, pp. 1-11, 2004

Lisa Mauck Weiland

Lisa Mauck Weiland and Donald J. Leo, (accepted December 2004) 2005, “Computational Analysis of Ionic Polymer Cluster Energetics”, Journal of Applied Physics, 97, 013541; also selected for publication in the Virtual Journal of Nanoscale Science and Technology, December 27, 2004.

Lisa Mauck Weiland and Donald J. Leo, 2004, “Electrostatic Analysis of Cluster Response to Electrical and Mechanical Loading in Ionic Polymers with Cluster Morphology,” Smart Materials and Structures, 13(2): 323-336.

Jorg M.K. Wiezorek

Deshpande, A.R. and Wiezorek, J.M.K., "Magnetic age hardening ofcold deformed bulk equiatomic Fe-Pd intermetallics during isothermal annealing", J. Magn. Magn. Mater. 270, 157-166 (2004).

Deshpande, A.R., Xu, H., and Wiezorek, J.M.K., "Effects of grain-size on coercivity of combined-reaction processed FePd intermetallics", Acta Materialia 52, 2903-2911 (2004).

Kulovits, A., Wiezorek, J.M.K., Soffa, W.A., Püschl W., and Pfeiler, W., "The influence of deformation by cold-work on L10-ordering in anisotropic FePd", J. Alloys Compounds 378, 285-289 (2004).

Ohodnicki, P.R. Jr., Deshpande, A., and Wiezorek, J.M.K., "Electron and magnetic force microscopy of bulk equiatomic Fe-Pd polycrystals with equiaxed microstructure", Micros. Microanalysis 10, 46-47(2004).

Shan, Z., Stach, E.A., Wiezorek, J.M.K., Knapp, J.A., Follstaedt, D.M., and Mao, S.X., "Grain Boundary Mediated Plasticity in Nanocrystalline Nickel", Science 305 (5684), 654-657 (2004).

Xu, H. and Wiezorek, J.M.K., “Transmission electron microscopy of room temperature deformed polytwinned L10-ordered FePd”, Acta Materialia 52, 395-403 (2004).

Deshpande, A.R., Xu, H., and Wiezorek, J.M.K., invited article, “Thermo-mechanical processing of hard ferromagnetic FePd-based intermetallics”, ASM Annual Meeting, October 2003, Pittsburgh, PA, In: Processing and Fabrication of Advanced Materials XII (PFAM XII), Eds. T.S. Srivatsan and R.A. Varin (TMS: Warrendale, PA) 60-74 (2004).

Deshpande, A.R. and Wiezorek, J.M.K., “Magnetic age-hardening response of combined-reaction processed ferromagnetic L10-FePd intermetallics”, ASM Annual Meeting, October 2003, Pittsburgh, PA, In: Processing and Fabrication of Advanced Materials XII (PFAM XII), Eds. T.S. Srivatsan and R.A. Varin (TMS: Warrendale, PA) 75-88 (2004).

Wiezorek, J.M.K., Zhang, X.D., and Fraser, H.L., "Shear transfer across hetero-interfaces in lamellar (g/a2)-TiAl intermetallics", Invited Article, Materials Research Society Symposium Proceedings Vol. 819 (MRS: Warrendale, PA), pages N4.5.1 - N.4.5.12 (2004).

Wiezorek, J.M.K., Zhang, X.D., and Fraser, H.L., "Shear transfer across hetero-interfaces in lamellar (g/a2)-TiAl intermetallics", Invited Article, Mat. Res. Soc. Symp. Proc. Vol. 821 (MRS: Warrendale, PA), pages P4.5.1 - P4.5.12 (2004).

Savio L-Y. Woo

Abramowitch, S., Woo, S.L-Y., Clineff, T., and Debski, R.: An Evaluation of the Quasi-linear Viscoelastic Properties of the Healing Medial Collateral Ligament in a Goat Model. Annals of Biomedical Engineering, 32:329-335, 2004.

Abramowitch, S., Woo, S.L-Y.: An Improved Method to Analyze the Stress Relaxation of Ligaments Following a Finite Ramp Time Based on the Quasi-Linear Viscoelastic Theory. J. of Biomechanical Engineering, 126(1):92-97, 2004.

Gabriel, M., Wong, E., Yagi, M., Debski, R., Fu, F.H., and Woo, S.L-Y.: Distribution of In Situ Forces in the Anterior Cruciate Ligament in Response to Rotatory Loads. J. of Orthopaedic Research, 22:85-89, 2004.

Giffin, J.R., Vogrin, T., Zantop, T., Woo, S.L-Y., and Harner, C.: Effects of Increasing Tibial Slope on the Biomechanics of the Knee. Am. J. of Sports Medicine 2001 Aircast Basic Science Award. Am. J. of Sports Medicine, 32:376-388, 2004.

Li, Z., Yang, G., Khan, M., Stone, D., Woo, S.L-Y., and Wang, J.H-C.: Inflammatory Response of Human Tendon Fibroblasts to Cyclic Mechanical Stretching. Am. J. of Sports Medicine, 32:435-440, 2004.

Margheritini, F., Mauro, C., Rihn, J., Stabile, K., Woo, S.L-Y., Harner, C.: Biomechanical Comparison of Tibial Inlay versus Transtibial Techniques for Posterior Cruciate Ligament Reconstruction. Am. J. of Sports Medicine, 32(3):587-593, 2004.

Song, Y., Debski, R., Musahl, V., Thomas, M., and Woo, S.L-Y.: A Three Dimensional Finite Element Model of the Human Anterior Cruciate Ligament: A Computational Analysis with Experimental Validation. J. of Biomechanics, 37:383-390, 2004.

Watanabe, Y., Van Scyoc, A., Tsuda, E., Debski, R., and Woo, S.L Y.: Biomechanical Function of the Posterior Horn of the Medial Meniscus: A Human Cadaveric Study. The J. of Orthopaedic Science, 9(3):280-284, 2004.

Yamamoto, Y., Hsu, W-H., Woo, S.L-Y., Van Scyoc, A., Takakura, Y., and Debski, R.: Knee Stability and Graft Function Following ACL Reconstruction: A comparison of a Lateral and an Anatomic Femoral Tunnel Placement. Am. J. of Sports Medicine, 32(8):1825-1832, 2004.

Judith C. Yang

Zhou, G.W. and Yang, J.C., “Reduction of Cu2O islands grown on a Cu (100) surface through vacuum annealing”, Phys. Rev. Lett. 93, 226101 (2004)

Zhou, G. and Yang, J.C., “In situ UHV-TEM investigations of the kinetics of initial stages of oxidation on the roughened of Cu (110)”, Surf. Sci. 559, p. 100-110 (2004).

Zhou, G. and Yang, J.C., “Temperature effects on the growth of oxide islands on Cu (110)”, Applied Surf. Sci. 222, p. 357-64. (2004).

Zhou, G.W. and Yang, J.C., “Nano-oxidation of Cu (100) Investigated by in situ UHV-TEM”, Mater. Sci. Forum 461-464, 183-192 (2004).

Han, X., McAfee, R., and Yang, J.C., “Kinetic Monte Carlo Model Simulating Nanoscale Oxidation Behavior”, Mat. Res. Soc. Proc., JJ9.4 Fall Boston (2004).

Li, L. and Yang, J.C., "Structural Changes of Ag Single Crystals by Exposure to Hyper-thermal Atomic Oxygen," Micros. Microanalysis 10 (S02), 286-287 (2004).

Li. L., and Yang, J.C., "Formation of nanosized metallic Ag grains by oxidation of Ag single crystals with hyperthermal atomic oxygen," Mat. Res. Soc. Symp. Proc. 788 (Continuous Nanophase and Nanostructured Materials), 37-42 (2004).

Xu, H., Menard, L., Frenkel, A., Nuzzo, R., Johnson, D. and Yang, J.C., “3-Dimensional structural characterization approaches of carbon-supported Au13 nano-clusters,” Micros. Microanalysis 10 (suppl 2), 454 (2004).