Below is a list of all of the labs as they are reached during the course. Lab Format General lab format. Lab 1 Introduction to Quartus (Click here for the Power Point Slides regarding this lab) Lab 2 Introduction to Pin Assignments (Click here for the Power Point Slides regarding this lab) Lab 3 Introduction to SignalTap II (Click here for the Power Point Slides regarding this lab) Lab 4 Introduction to Nios Hardware Development (Click here for the Nios tutorial) Click for reference pin assignments Lab 5 Introduction to Nios Software Development (Click here for the GNUPro Toolkit User’s Guide for Altera Nios) Lab 6 A Simple User Interface (Click here for the Keypad Spec, SDK Checklist, and Supplementary Handout) Lab 7   Introduction to Embedded Systems with an RTOS (Click here for the uC/OS II Zip file – Unzip it in your “src” folder) Click here for the Lab 7 Supplementary Handout Lab 8   Mini Project (Click here for Motor Controller Servo Setup) Datasheets: ADC0820 A/D Converter (Provided In Lab Kit) AD558 D/A Converter (Available In Lab) or DAC08 D/A Converter (Available In Lab) LM348 Operational Amplifiers (Provided In Lab Kit) Thermistor Model No. NTC-102 Datasheet (Available In Lab Kit) Photocell Information (Available In Lab Kit) References: IEEE Reference Style Guide Nios Board Reference PIO Data Sheet PIO & Interrupt Info Excalibur Reference Pin-Assignments Excalibur PCB Schematic Pin Assignment Sheet Review of 'C' Nios Programmer's Reference Manual